MHI2 full conversion to EU

MHI2 US/JP/KR to European conversion

Prepare the unit

1. Update to latest firmware supported by More Incredible Bash, because we will need to use M.I.B. as the conversion tool.

Tools and software

• quality SD card, 32GB
• More Incredible Bash + patches
• target EU firmware
• latest MHI2 EU maps
• Gracenote EU update (optional)
• RSDB EU update (optional)
• PPOIs EU update (optional)
• Boardbook update (optional for Audi and Porsche)

Convert MHI2 unit to European Firmware

Install More Incredible Bash

1. Insert SD card with More Incredible Bash
2. REM → Update → SD card → install More Incredible Bash
3. GEM → m.i.b. → advanced_settings → eu_conversion → convert unit to EU. It will end with "reboot (..) and run conversion again"
4. reboot the unit, and run the `convert unit to EU` again
5. ...and again - you see "Now you can insert (...) and update".
6. GEM → m.i.b. → advanced_settings → swdl_fw_updates → Enable user defined SWDL → ENABLED
7. GEM → m.i.b. → advanced_settings → swdl_fw_updates → Ignore Region and Variant → ENABLED
8. exit GEM but don't reboot the unit
9. insert FAT32 SD with latest EU firmware for this unit
10. REM → Update → User defined → RightButton → Set all to [Y]
11. if you have Bose, set it to [N] (because we don't want to update Bose amplifier)
12. scroll down → Start update; wait...
13. In "Device summary" scroll down → Resume
14. wait for reboot, go to MMI settings and set your language

Patch the firmware

1. GEM → m.i.b. → patch_unit_aio → PATCH NOW
2. wait fot the patch to be applied
3. after patch is done and unit is rebooted, go to REM and check if new keys/FECs are installed and valid

Install EU Maps and Speed Trap PPOIs

1. GEM → m.i.b. → navigation → check coding → SDS region → Europe → Save changes
2. insert SD with MHI2 EU maps
3. System Care → System Update → SD1 → Start Software Update; wait...
4. insert SD with PPOIs
5. System Care → System Update → SD1 → Start Software Update; wait...

Install Gracenote, RSDB, Boardbook

1. insert SD with Gracenote update
2. System Care → System Update → SD1 → Start Software Update; wait...
3. insert SD with RSDB update
4. System Care → System Update → SD1 → Start Software Update; wait...
5. VCDS/OBD11/VPC → module: 5F → Basic Settings → Formatting Partitions of Internal Memory → Navigation Data Base → Go
6. insert SD with Boardbook
7. Settings → Boardbook → install; wait...

Fix B201A SVM fault

1. VCDS/OBD11/VPC → module: 5F → fix B201A fault with "i'm so XORy" calculator

References

• https://www.drive2.ru/b/651860313007718652/
• https://www.drive2.ru/b/648225602444205225/
• https://www.drive2.ru/b/646954017246681747/