MHI2 full conversion to EU

MHI2 US/JP/KR/CN to European conversion.

Prepare the unit

1. Update to latest firmware supported by More Incredible Bash, because we will need to use M.I.B. as the conversion tool.

Tools and software

• quality SD card, 32GB
• More Incredible Bash + patches
• target EU firmware
• latest MHI2 EU maps
• Gracenote EU update (optional)
• RSDB EU update (optional)
• PPOIs EU update (optional)
• Boardbook update (optional for Audi and Porsche)

Convert MHI2 unit to European Firmware

Install More Incredible Bash

1. Insert SD card with More Incredible Bash
2. REM → Update → SD card → install More Incredible Bash

Prepare for EU firmware

1. GEM → m.i.b. → advanced_settings → eu_conversion → convert unit to EU. It will end with "reboot (..) and run conversion again"
2. reboot the unit, and run the `convert unit to EU` again
3. ...and again - you see "Now you can insert (...) and update".

Prepare custom full SWLD

1. GEM → m.i.b. → advanced_settings → swdl_fw_updates → Enable user defined SWDL → ENABLED
2. GEM → m.i.b. → advanced_settings → swdl_fw_updates → Ignore Region and Variant → ENABLED
3. exit GEM but don't reboot the unit
4. insert FAT32 SD with latest EU firmware for this unit
5. REM → Update → User defined → RightButton → Set all to [Y]
6. if you have premium sound system with external audio amplifier (Bose, Dynaudio, Fender, B&0...), set the amplifier (AMP16*APN / AMP_BAO_P3 / Bose6416*) to [N], because we don't want to update the amplifier. You could do it, but you will need to upload correct parameters to the amplifier afterwards.
7. if you have Audi A3 8V (AU37x), set the FC2H37xE to [N]. This is the display mechanism firmware. If you flash it with the EU firmware version, the mechanism will stay permanently open.

Start the EU firmware update

1. scroll down → Start update; wait...
2. In "Device summary" scroll down → Resume
3. wait for reboot, go to MMI settings and set your language

Patch the unit

This is for FEC and CP

1. GEM → m.i.b. → patch_unit_aio → PATCH NOW
2. wait fot the patch to be applied
3. after patch is done and unit is rebooted, go to REM and check if new keys/FECs are installed and valid

Install options

EU Maps

1. GEM → m.i.b. → navigation → check coding → SDS region → Europe → Save changes
2. VCDS/OBD11/VPC → module: 5F → Basic Settings → Formatting Partitions of Internal Memory → Navigation Data Base → Go
3. insert SD with MHI2 EU maps
4. System Care → System Update → SD1 → Start Software Update; wait...

Speedtrap PPOIs

1. insert SD with PPOIs
2. System Care → System Update → SD1 → Start Software Update; wait...

Gracenote

1. insert SD with Gracenote update
2. System Care → System Update → SD1 → Start Software Update; wait...

Radiostation Database

1. insert SD with RSDB update
2. System Care → System Update → SD1 → Start Software Update; wait...

Boardbook

Audi and Porsche

1. insert SD with Boardbook
2. Settings → Boardbook → install; wait...

Finishing Touches

Video In Motion

TODOOO

Fix B201A SVM fault

1. VCDS/OBD11/VPC → module: 5F → fix B201A fault with "i'm so XORy" calculator

or

1. GEM → m.i.b. → SVM_fix

References

• https://www.drive2.ru/b/651860313007718652/
• https://www.drive2.ru/b/648225602444205225/
• https://www.drive2.ru/b/646954017246681747/