MIB bench setup: Difference between revisions
Jump to navigation
Jump to search
Created page with "It's easy to set up bench environment to run MIB unit outside a vehicle. There are some limitations to it, but still it makes research much more convenient and faster if MIB is available outside the car. == Basic setup == * MIB main unit, * MIB display unit, * Power source (12V DC, min. 3A) for main unit and display unit, * QuadLock connector, terminals, wires, * 12-pin connector for the display unit, * 4-pin HSD LVDS cable to connect main unit with display unit. == Ex..." |
|||
| Line 2: | Line 2: | ||
== Basic setup == | == Basic setup == | ||
=== Hardware === | |||
* MIB main unit, | * MIB main unit, | ||
* MIB display unit, | * MIB display unit, | ||
| Line 8: | Line 9: | ||
* 12-pin connector for the display unit, | * 12-pin connector for the display unit, | ||
* 4-pin HSD LVDS cable to connect main unit with display unit. | * 4-pin HSD LVDS cable to connect main unit with display unit. | ||
=== Basic setup demo === | |||
<youtube>S_PkyWpDE4k</youtube> | |||
== Extended setup == | == Extended setup == | ||
Latest revision as of 22:02, 9 January 2025
It's easy to set up bench environment to run MIB unit outside a vehicle. There are some limitations to it, but still it makes research much more convenient and faster if MIB is available outside the car.
Basic setup
Hardware
- MIB main unit,
- MIB display unit,
- Power source (12V DC, min. 3A) for main unit and display unit,
- QuadLock connector, terminals, wires,
- 12-pin connector for the display unit,
- 4-pin HSD LVDS cable to connect main unit with display unit.
Basic setup demo
Extended setup
In addition to the basic list of elements:
- loudspeaker,
- ignition on emulator,
- USB port,
- gateway with OBD2 diagnostic port,
- 2x USB-to-RS232 TTL converter,
- SD cards and USB drives.