MHI2 full conversion to EU: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 1: | Line 1: | ||
MHI2 US/JP/KR to European conversion | MHI2 US/JP/KR/CN to European conversion. | ||
== Prepare the unit == | == Prepare the unit == | ||
| Line 21: | Line 21: | ||
# Insert SD card with More Incredible Bash | # Insert SD card with More Incredible Bash | ||
# REM → Update → SD card → install More Incredible Bash | # REM → Update → SD card → install More Incredible Bash | ||
=== Prepare for EU firmware === | |||
# GEM → m.i.b. → advanced_settings → eu_conversion → convert unit to EU. It will end with "reboot (..) and run conversion again" | # GEM → m.i.b. → advanced_settings → eu_conversion → convert unit to EU. It will end with "reboot (..) and run conversion again" | ||
# reboot the unit, and run the `convert unit to EU` again | # reboot the unit, and run the `convert unit to EU` again | ||
# ...and again - you see "Now you can insert (...) and update". | # ...and again - you see "Now you can insert (...) and update". | ||
=== Install EU firmware === | |||
# GEM → m.i.b. → advanced_settings → swdl_fw_updates → Enable user defined SWDL → ENABLED | # GEM → m.i.b. → advanced_settings → swdl_fw_updates → Enable user defined SWDL → ENABLED | ||
# GEM → m.i.b. → advanced_settings → swdl_fw_updates → Ignore Region and Variant → ENABLED | # GEM → m.i.b. → advanced_settings → swdl_fw_updates → Ignore Region and Variant → ENABLED | ||
| Line 34: | Line 38: | ||
# wait for reboot, go to MMI settings and set your language | # wait for reboot, go to MMI settings and set your language | ||
== Patch the | == Patch the unit == | ||
This is for FEC and CP | |||
# GEM → m.i.b. → patch_unit_aio → PATCH NOW | # GEM → m.i.b. → patch_unit_aio → PATCH NOW | ||
# wait fot the patch to be applied | # wait fot the patch to be applied | ||
# after patch is done and unit is rebooted, go to REM and check if new keys/FECs are installed and valid | # after patch is done and unit is rebooted, go to REM and check if new keys/FECs are installed and valid | ||
== Install | == Install options == | ||
=== EU Maps === | |||
# GEM → m.i.b. → navigation → check coding → SDS region → Europe → Save changes | # GEM → m.i.b. → navigation → check coding → SDS region → Europe → Save changes | ||
# VCDS/OBD11/VPC → module: 5F → Basic Settings → Formatting Partitions of Internal Memory → Navigation Data Base → Go | |||
# insert SD with MHI2 EU maps | # insert SD with MHI2 EU maps | ||
# System Care → System Update → SD1 → Start Software Update; wait... | # System Care → System Update → SD1 → Start Software Update; wait... | ||
=== Speedtrap PPOIs === | |||
# insert SD with PPOIs | # insert SD with PPOIs | ||
# System Care → System Update → SD1 → Start Software Update; wait... | # System Care → System Update → SD1 → Start Software Update; wait... | ||
== | === Gracenote === | ||
# insert SD with Gracenote update | # insert SD with Gracenote update | ||
# System Care → System Update → SD1 → Start Software Update; wait... | # System Care → System Update → SD1 → Start Software Update; wait... | ||
=== Radiostation Database === | |||
# insert SD with RSDB update | # insert SD with RSDB update | ||
# System Care → System Update → SD1 → Start Software Update; wait... | # System Care → System Update → SD1 → Start Software Update; wait... | ||
=== Boardbook === | |||
Audi and Porsche | |||
# insert SD with Boardbook | # insert SD with Boardbook | ||
# Settings → Boardbook → install; wait... | # Settings → Boardbook → install; wait... | ||
== Fix B201A SVM fault == | == Finishing Touches == | ||
=== Video In Motion === | |||
TODOOO | |||
=== Fix B201A SVM fault === | |||
# VCDS/OBD11/VPC → module: 5F → fix B201A fault with "i'm so XORy" calculator | # VCDS/OBD11/VPC → module: 5F → fix B201A fault with "i'm so XORy" calculator | ||
or | |||
# GEM → m.i.b. → SVM_fix | |||
== References == | == References == | ||
Revision as of 23:16, 13 March 2025
MHI2 US/JP/KR/CN to European conversion.
Prepare the unit
- Update to latest firmware supported by More Incredible Bash, because we will need to use M.I.B. as the conversion tool.
Tools and software
- quality SD card, 32GB
- More Incredible Bash + patches
- target EU firmware
- latest MHI2 EU maps
- Gracenote EU update (optional)
- RSDB EU update (optional)
- PPOIs EU update (optional)
- Boardbook update (optional for Audi and Porsche)
Convert MHI2 unit to European Firmware
Install More Incredible Bash
- Insert SD card with More Incredible Bash
- REM → Update → SD card → install More Incredible Bash
Prepare for EU firmware
- GEM → m.i.b. → advanced_settings → eu_conversion → convert unit to EU. It will end with "reboot (..) and run conversion again"
- reboot the unit, and run the `convert unit to EU` again
- ...and again - you see "Now you can insert (...) and update".
Install EU firmware
- GEM → m.i.b. → advanced_settings → swdl_fw_updates → Enable user defined SWDL → ENABLED
- GEM → m.i.b. → advanced_settings → swdl_fw_updates → Ignore Region and Variant → ENABLED
- exit GEM but don't reboot the unit
- insert FAT32 SD with latest EU firmware for this unit
- REM → Update → User defined → RightButton → Set all to [Y]
- if you have Bose, set it to [N] (because we don't want to update Bose amplifier)
- scroll down → Start update; wait...
- In "Device summary" scroll down → Resume
- wait for reboot, go to MMI settings and set your language
Patch the unit
This is for FEC and CP
- GEM → m.i.b. → patch_unit_aio → PATCH NOW
- wait fot the patch to be applied
- after patch is done and unit is rebooted, go to REM and check if new keys/FECs are installed and valid
Install options
EU Maps
- GEM → m.i.b. → navigation → check coding → SDS region → Europe → Save changes
- VCDS/OBD11/VPC → module: 5F → Basic Settings → Formatting Partitions of Internal Memory → Navigation Data Base → Go
- insert SD with MHI2 EU maps
- System Care → System Update → SD1 → Start Software Update; wait...
Speedtrap PPOIs
- insert SD with PPOIs
- System Care → System Update → SD1 → Start Software Update; wait...
Gracenote
- insert SD with Gracenote update
- System Care → System Update → SD1 → Start Software Update; wait...
Radiostation Database
- insert SD with RSDB update
- System Care → System Update → SD1 → Start Software Update; wait...
Boardbook
Audi and Porsche
- insert SD with Boardbook
- Settings → Boardbook → install; wait...
Finishing Touches
Video In Motion
TODOOO
Fix B201A SVM fault
- VCDS/OBD11/VPC → module: 5F → fix B201A fault with "i'm so XORy" calculator
or
- GEM → m.i.b. → SVM_fix