MHI2 full conversion to EU

MHI2 US/JP/KR to European conversion

Prepare the unit

Update to latest firmware supported by More Incredible Bash, because we will need to use M.I.B. as the conversion tool.

Prepare SD cards for: More Incredible Bash + patches; latest EU/ER fw; latest MHI2 EU maps; GracenoteDB; RadioStation DataBase (radio logos); PPOIs; Boardbook

Install More Incredible Bash via REM
GEM → m.i.b. → advanced_settings → eu_conversion → convert unit to EU. It will end with "reboot (..) and run conversion again"
reboot the unit, and run the `convert unit to EU` again
...and again - you see "Now you can insert (...) and update".
GEM → m.i.b. → advanced_settings → swdl_fw_updates → Enable user defined SWDL → ENABLED
GEM → m.i.b. → advanced_settings → swdl_fw_updates → Ignore Region and Variant → ENABLED
exit GEM but don't reboot the unit
insert FAT32 SD with latest EU firmware for this unit
REM → Update → User defined → RightButton → Set all to [Y]
if you have Bose, set it to [N] (because we don't want to update Bose amplifier)
scroll down → Start update; wait...
In "Device summary" scroll down → Resume
wait for reboot, go to MMI settings and set your language

GEM → m.i.b. → patch_unit_aio → PATCH NOW
wait fot the patch to be applied
after patch is done and unit is rebooted, go to REM and check if new keys/FECs are installed and valid

insert SD with Gracenote update
System Care → System Update → SD1 → Start Software Update; wait...
insert SD with RSDB update
System Care → System Update → SD1 → Start Software Update; wait...
VCDS/OBD11/VPC → module: 5F → Basic Settings → Formatting Partitions of Internal Memory → Navigation Data Base → Go
insert SD with Boardbook
Settings → Boardbook → install; wait...