Rear-View Camera
Types of camera systems
RVC-LOW
Simple config. Just connect FBAS/CVBS signal and shield to QuadLock, enable RVC-LOW in 0x5F coding, reboot and done.
Camera image will be triggered with reverse gear signal. There's no CAN-BUS communication between camera and the vehicle, so there's no advanced features like dynamic guiding lines, view switching. Also, there's no calibration of the RVC-LOW camera.
RVC-HIGH
//TODO
AreaView 360
//TODO
Camera settings
VPS Views
- VPSDEFAULTVIEW_REARVIEW;
- VPSDEFAULTVIEW_FRONTVIEW;
- VPSDEFAULTVIEW_SIDEVIEW;
- VPSDEFAULTVIEW_BIRDVIEW;
- VPSDEFAULTVIEW_AUTO;
- VPSDEFAULTVIEW_EXTCAM;
- VPSDEFAULTVIEW_LASTVIEW;
- VPSDEFAULTVIEW_UNKNOWN;
VPS Supported Modes (source 1)
- parkbox ()
- parallelToRoad ()
- crossing ()
- trailerAssist ()
- offroad
- offroadKOG
- trailerAssistARA
- mainMode
- birdview3D
VPS Supported Modes (source 2)
- VPSMODE_NOMODE;
- VPSMODE_PARKBOX;
0x6C → Long Coding → Byte: 07 → Bit: 0 - VPSMODE_PARALLELTOROAD;
0x6C → Long Coding → Byte: 07 → Bit: 1 - VPSMODE_OFFROAD;
- VPSMODE_RIGHTSIDEVIEW;
- VPSMODE_LEFTSIDEVIEW;
- VPSMODE_LEFTRIGHTSIDEVIEW;
- VPSMODE_CROSSING;
0x6C → Long Coding → Byte: 07 → Bit: 4 - VPSMODE_TRAILERASSIST;
0x6C → Long Coding → Byte: 07 → Bit: 2 - VPSMODE_BIRDVIEW;
- VPSMODE_ONLYSIDEVIEW;
- VPSMODE_3DBIRDVIEW;
- VPSMODE_TRAILERASSIST_ARA;
- VPSMODE_OFFROAD_KOG;
- VPSMODE_LASTMODE;
VPS Screens
- VPSSCREEN_NOSCREEN;
- VPSSCREEN_FULLSCREEN;
- VPSSCREEN_SPLITSCREEN;
- VPSSCREEN_LEGALSCREEN;
- VPSSCREEN_LASTSCREEN;