MHI2 full conversion to EU

MHI2 US/JP/KR to European conversion

Prepare the unit

Update to latest firmware supported by More Incredible Bash, because we will need to use M.I.B. as the conversion tool.

Insert SD card with More Incredible Bash
REM → Update → SD card → install More Incredible Bash
GEM → m.i.b. → advanced_settings → eu_conversion → convert unit to EU. It will end with "reboot (..) and run conversion again"
reboot the unit, and run the `convert unit to EU` again
...and again - you see "Now you can insert (...) and update".
GEM → m.i.b. → advanced_settings → swdl_fw_updates → Enable user defined SWDL → ENABLED
GEM → m.i.b. → advanced_settings → swdl_fw_updates → Ignore Region and Variant → ENABLED
exit GEM but don't reboot the unit
insert FAT32 SD with latest EU firmware for this unit
REM → Update → User defined → RightButton → Set all to [Y]
if you have Bose, set it to [N] (because we don't want to update Bose amplifier)
scroll down → Start update; wait...
In "Device summary" scroll down → Resume
wait for reboot, go to MMI settings and set your language

GEM → m.i.b. → patch_unit_aio → PATCH NOW
wait fot the patch to be applied
after patch is done and unit is rebooted, go to REM and check if new keys/FECs are installed and valid

insert SD with Gracenote update
System Care → System Update → SD1 → Start Software Update; wait...
insert SD with RSDB update
System Care → System Update → SD1 → Start Software Update; wait...
VCDS/OBD11/VPC → module: 5F → Basic Settings → Formatting Partitions of Internal Memory → Navigation Data Base → Go
insert SD with Boardbook
Settings → Boardbook → install; wait...